• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Gigabyte 7NNXP SATA and IDE RAID?

E

Eirwal

Junior Member

I've just set up the mobo and all the drivers seem to have insalled well. If I go to the device manager and look under SCSI Controllers; it reports both the SIL and the gigaraid. Under properties they all check out to be functioning OK. But, XP only finds the SIL serial ATA raid as drive C and not the Giga raid at all. I have tried cahnging the Giga Raid to Array 0, then 1, nada. Can someone please help?

Athlon 3200+
Gigabyte 7nnxp F13
512 meg Pair Corsair matched 3200LL
2 x Maxtor 80 gig on SATA Raid 0
2 x IBM 40 gig on IDE Raid 1
XP SP1
Matrox Parhelia 128
 
I do not know for a sure on this mobo but are you sure that you have it all connected right. i know that on the dfi nf2 the sata cancels out the first standard ata port. are you completely sure taht you have your other drives connected to the raid controller as you may have them in the standard ata ports.
 
Yep, I'm sure they are plugged into the raid sockets. The IDE channels are clustered with the floppy drive socket. The strangew thing is that on boot up the Bios Gigaraid facility sees them and even tells me thay are raided! Windows just fails to recognise them as a drive.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top