Ghosting SCSI drives -- Is it possible?

[SpomaMewor]

I have an 2K server running 3 SCSI drives that are connected via RAID. Is it possible for me to take a GHOST image of these drives? I would think I have to do something like load the controller drivers onto my GHOST boot disk.

 

[Shagga]

Welcome to AT...

Yes it is possible to GHOST SCSI drives. I use Norton's GHOST and it does it very well. However, as your probably aware DOS cannot see NTFS drive/partitions and I presume you are running NTFS as opposed to FAT32. If you are running NTFS and dont have a FAT32 drive/partition you will need to make one as Norton's GHOST needs a FAT32 drive to save the image on. It will read NTFS but not write to NTFS only FAT32.

DRIVE IMAGE is suppose to be able to do it but I have no experience with this piece of software.

Hope that helps.



[edit]

Sorry, I should have read it properly. In terms of GHOSTING RAID drives I'm not sure, but it is likely that this can be done I would have thought.

 

[ynotravid]

Short answer: yes.

What controller card are you using?