Gainward 650ti 2gb(mini pcb) with the Proli MK-13

[dr.noob]

Now it's a beast!

1. Stock cooler


2.Rubber Hammer time



3.Now it's perfect


4.The problem


5.


6.


7.***5.7GHZ OC 6.6GHZ***


8.The zip-tie is a temporarely thing, it's there to make some pressure and don't let the heatsink hit the condensators


9.


10.

 

[dr.noob]

11.


Tests asap.

Just for those who can't wait, idle 22ºC and in the end of the Unigine Valley test around 40-44ºC, I don't remember the exact number.NO FANS/OPEN CASE.

And the best part, i can close it.For finishing this adventure i'll add probably one or two fans to the panel of the case.

edit: after some loops in Unigine i got 62ºC, i'm using a cheap Artic cooling thermal paste.

Will probably test with a 120mm fan later.

edit: sad news, as soon as i put the panel it does hit the cooler, the small hit makes the temperatures go nuts...I need to mod the panel too.Come one! LOL

 

[dr.noob]

Stock clocks
928_core
5700_mem
1.062v

Tests on open case with an Akasa 1500rpm 120mm fan:

Idle: 22ºC

Load: 30ºC after 3 loops of Unigine Valley Basic

Tests on open case with an Akasa 1500rpm 120mm fan plus another 1000rpm fan:

Load: 28ºC after 3 loops of Unigine Valley Basic

Max OC
928+245_core 1.17GHZ
5700+600_mem 6.6GHZ
1.150v

Tests on open case with an Akasa 1500rpm 120mm fan:

Load: 39ºC after 3 loops of Unigine
*******************************************
*******************************************
Now i need to think in the mod i'll have to do on the side panel. 😕

 

[dr.noob]

More fun stuff. 😀

I edit the bios using Kepler Bios Editor v1.24 and then flashed it using Nvflash 5.118 for Windows and all went well.

The thing is it didn't allow me to use 1.21v but only 1.62v.




I was able to get more 15mhz stable on 3dmark11.Maybe the software is limiting the voltage?

*************************
*************************

I know it's a bit cold here in Portugal and the side panel is off but:



xD

 

[dr.noob]

Don't be shy, feel free to ask/criticize this experiencie.

My next post, i hope, will be with the side panel modded.

 

[dr.noob]

Big news. 😎

 

[dr.noob]

:whiste:

 

[tweakboy]

Very sexy rig my brother. gl

 

[dr.noob]

Final picture.

This is for personal use so it's not that bad. :whiste:

Thanks for watching...

 

[p_monks33]

What about a couple of acrylic clear fans?

 

[dr.noob]

What about a couple of acrylic clear fans?

Can you point some to me?

Now with black filters.