FTP Server on RT314

[brian1]

I am trying to figure out how to configure my RT314 router and FTP server (Serv-U 3) to work together. I read the earlier thread today, but to solve anything. I followed Netgear's support page and this did not solve my problem. I have the latest firmware (3.25).

If I try to FTP to my outside IP address on port 21, I get my router. If I FTP to my LAN IP address (192.168.0.3) on port 21, I get the Serv-U FTP server. How do I configure it so that I get my FTP server when I try to connect to my outside IP address on port 21?

Below are some of my configurations that may help diagnose the problem.
If you need to see anything else, let me know.
-----------------------
Menu 15 - SUA Server Setup

Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 113 113 192.168.0.3
3. 59 59 192.168.0.3
4. 21 21 192.168.0.3
5. 4000 5000 192.168.0.3
6. 80 80 192.168.0.3
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 1026 1026 RR Reserved
-----------------------
Menu 21.3.2 - TCP/IP Filter Rule

Filter #: 3,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6 IP Source Route= No
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 21
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #=
Port # Comp= None
TCP Estab= No
More= No Log= None
Action Matched= Forward
Action Not Matched= Check Next Rule
-----------------------
Menu 24.11 - Remote Management Control

TELNET Server:
Server Port = 23 Server Access = LAN only
Secured Client IP = 0.0.0.0

FTP Server:
Server Port = 21 Server Access = ALL
Secured Client IP = 0.0.0.0

Web Server:
Server Port = 80 Server Access = LAN only
Secured Client IP = 0.0.0.0
-----------------------