FSB/Multiplier/Voltage question

[Richter]

What default settings should I use for a 1.4(266) T-Bird?
I have the newest 3c BIOS for my KT7a RAID but there is not a 266 setting and the 133 puts the PCI at 44MHz. Don't I need 133/33?

Thanks,
-Tj

 

[p0tempkin]

There should be a jumper on your motherboard that will switch between 100MHz FSB and 133MHz FSB modes. Make sure you have it set to the latter.

10.5 Multiplier, 133MHz FSB, 33MHz PCI, 66MHz AGP. Everything should be within spec.

 

[IdahoB]

Make sure that the default FSB is set via jumper to 133MHz - that'll bring your PCI divider up to 4 and the PCI speed down to 33MHz.

 

[Richter]

THANKS! I was going nuts.

If I had my mobo manual I would have figured that out, Doh.

 

[dietrologia]

Isn't the KT7a jumperless?!

 

[Richter]

It is mostly jumperless. But I am yet to see a mobo with NO jumpers at all.

Having said that, does anybody know where the jumper is located to chang the FSB to 133/33? I can't find my manual anywhere

-Richter

[edit] There is no jumper - The BIOS revision 3c is beta and does NOT have 133/33 setting only 133/44 witch is stupid who can use a 44 PCI bus? ZT is the BIOS to use if you have 266 FSB Athlon. [/edit]