• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

For peps with a retail R7500 or who know s-video wiring

I

Instan00dles

Golden Member
With the retial version this car an s-vid to rca cord in there.. if you look on the s-vid end there are 4 extra pins compaired to a regular s-vid cord. I am wondering if I were to rip these pins out would it still owrk. I have a better use for this cord but in wont fit and I dont want to pay 20 bucks for the s-vid to rca converter. well tanks if anyone can help me on this one
 
You can make one yourself pretty easy. I got a s-vid male connector, 20' of s-vid cable and a mail rca plug for $15 at Radio shack. My cable has s-vid on one end and rca on the other. I used real s-vid cable because it has shielding and it was going 20', but if you really just want the rca and aren't going very far, you could probably just use a regular cable, and wire that right to the s-vid connector. On the 4-pin connector, two go to one terminal of the rca and the other two go to the second terminal.

Good luck.

~m
 
dp you have a pic that says what each wire does, I just chopped open a spare s-vid cable and there is 4 wires in there that have a rubber around them and a 5th wier with not rubber around it. where would all the wires go, the colours arebrown red orange and black, also the one without rubber that is sliver
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top