Fong Kai FK-320 adding case fans

[TheNemesis]

I recently built a system using the Fong Kai FK-320, MSI K7T pro2, duron 600 etc...I was wondering where i would add case fans, which would be good to get, and how many extra i should add. currently the only fan on it is the exhaust over the proccessor, and the HSF is sucking the air from the alpha 6035. thanks

 

[clumsum]

You add the front case fan into the pullout plastic fan housing........(just bend the plastic tab on top to release the plastic slide-out enclosure)

The plastic fan housing is designed for either 92mm or 120mm fans..............just remove the extention tabs for the larger fan.

The rear fan is setup to blow air onto the cpu....(unless you already turned the fan around to exhaust?)......at least all of the ones I have checked blow in.......

I would set the rear fan so that it is blowing the same direction as the hsf........so the two are not opposing each other......(sounds like you are ok now)
One additional front fan should be more than adaquate for cooling......I used a 120mm fan, there are many different cfm versions available............depending on how much cooling your system requires and what noise level you can tolerate............