got my gfx card today so was able to finish off my build:
e6300
gigabyte DS3
seagate SATA 160gb
Powercolour x1900xt (xfire master card edition)
Tagan 530 modular PSU (turned to combined not split)
plugged everything in..
nothing
reseated all the mobo connections:
The PSU fan comes on
The CPU Fan comes on
The GFX card comes on
The power LED comes on
The x1900 extpwr and t_fault little red LEDs come on.
these only come on like after every 10-20 tries after removing the power cable, switching on and off (at the psu) etc and they only come on for a fraction of a second before going dead again
what could be wrong.. any help appreciated.
e6300
gigabyte DS3
seagate SATA 160gb
Powercolour x1900xt (xfire master card edition)
Tagan 530 modular PSU (turned to combined not split)
plugged everything in..
nothing
reseated all the mobo connections:
The PSU fan comes on
The CPU Fan comes on
The GFX card comes on
The power LED comes on
The x1900 extpwr and t_fault little red LEDs come on.
these only come on like after every 10-20 tries after removing the power cable, switching on and off (at the psu) etc and they only come on for a fraction of a second before going dead again
what could be wrong.. any help appreciated.