First big overclock with the DFI Infinity....... what next?

[skyking]

I have a pair of generic BH-5 512 sticks in dual channel mode. they defaulted by spd to 9-4-4-4-2
I have them at 5-2-2-2-2 now, and the have ran the prime blended torture test for a day or so that way.
The proc is a t-bred b 1700 dut3c, and I have the voltage bumped to 1.65v
I have an ax-7 on it with as-3. Temps are 30/37 idle, and 31/51 under load.
I have been running Prime an hour or so at each multi, and it has not crashed yet
Go for a higher fsb, or leave it at 200 and go for the 12x?

 

[LED]

Higher FSB...My BHers go 262 on the Infinity 😛

 

[skyking]

nice!
I tried 12 x 200, and it finally locked up booting into windows. I gave it 1.725 v, which looks like 1.7 in the hardware doctor.It is idling away at 37C now.
I will go back and drop the multi now, and push fsb for a while😛

it failed prime quick at 225 fsb, so I went 6-4-4-4-2.5, and that failed. I am backing off to 94442, and see what happens. 10x multi.

EDIT:
OK, I am talking to myself. *Confirmed*

220 fsb at 6-3-3-3-2.5 ram is the holdup, I think.