• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Faulty A64 Temperature Sensor?

I've got a Venice 3000+ (E6) at the settings below.

It will idle at around 36C and under load it only raises by about 2 or 3 degrees. As a little test I unplugged the CPU fan (I know it doesn't sound like a good idea) and went into the BIOS and the temp slowly rose up to about 45C at which point I shut it down.

Do I have good enough flow that the temperature doesn't change much, or is the temperature probe partially gibbled?

Thanks in advance.
 
Originally posted by: Hand Ov DooM
I've got a Venice 3000+ (E6) at the settings below.

It will idle at around 36C and under load it only raises by about 2 or 3 degrees. As a little test I unplugged the CPU fan (I know it doesn't sound like a good idea) and went into the BIOS and the temp slowly rose up to about 45C at which point I shut it down.

Do I have good enough flow that the temperature doesn't change much, or is the temperature probe partially gibbled?

Thanks in advance.

What is the ambient temp of the room your rig is located in Hand Ov DooM? 😕
 
If you look at his sig, it's the stock fan.

My question - is the stock fan ramping up speed quickly to 6000rpm or whatever it's maximum is? I would have expected Idle to be a little cooler as well - mabe the fans running slow (or not at all) and then suddenly going full speed? Do you notice any sudden change in sound?
 
Back
Top