Extremely low 3dmark03 benchmarks from A8N in Sli

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

FastEddie

Golden Member
Oct 9, 1999
1,946
0
0
Originally posted by: YuKKa
I'll give the beta drivers a crack, any idea why there is a different file size for U.S and International drivers? Localisation of languages??

I have checked the power supply connects and the EZ Plug next to slot 1 is definetely in.

I've posted some info up on XFX support, I'll see what they say. I hate computers! !

The size difference is just the language pacs that are added to the international drivers. ;)

 

GuitarDaddy

Lifer
Nov 9, 2004
11,465
1
0
The reason I mentioned clearing CMOS.

Both times the card in slot1 died in my rig, Only after I cleared CMOS would the "Good" card work properly in slot1 in single mode.

In my experience every time I switched from SLI mode to single mode or visa versa I had to reset CMOS to get the bios to properly recognise the card(s). There is a widely reported bios bug on this board that causes bios to get corrupted whenever you shutoff power to the motherboard and change or add hardware.

Asus should have printed on the box "THE CMOS JUMPER IS YOUR BEST FRIEND":laugh:
 

carlpalmer

Junior Member
Feb 11, 2005
1
0
0
Hey

I bought a XFX GF 6600 GT.....

AND my score in 3dmark03 is "drum roll" -> 4729!!!!!

Rubbish....

SOmething is wrong you are not alone YuKKa

Please help...

MY SPEC

AMD Athlon(tm) 64 Processor 3000+ -> 2.00GHz
ASROCK K8 Combo-Z
1GB DDR-SDRAM
NVIDIA GeForce 6600 GT (Vstudios Xtreme G Quality)


 

YuKKa

Junior Member
Jan 29, 2005
11
0
0
Hi,

I sent my MB back to the company I purchased it from and was given a refund without much explanantion - have a replacement coming out in the next few days and will let you know if this fixed it..

 

vcooper1

Junior Member
Feb 21, 2005
8
0
0
I just got my score using 3d mark 3 in SLI and I scored 13182 3D marks.

My Rig.

Athlon 64 3500+ 90nm Winchester core AI booster slightly overclocked, 3% to 2.266Mhz 825mhz FSB @ 16000 MT/s

2 XFX 6600 GT's in SLI mode.

1GB Ultra PC3200/DDR/400Mhz ram. 2x 512MB in Duel channel memory config.

Antec 550W 2.03 compliant PSU with 24 pin connector.

For my config, this was the highest score yet, & the best bang for the buck!
I know I would have done alot better with twin 6800 GT/OC GPU's, but the prices are ridiculous!!

I've tested games like Far Cry, UT2004, UT-GOY, COD, BF1942, MOHAA. All my games run steller performance! Not one glich!! no kidding!

A new bios version was released today, #1004 fixes another SLI issue & more.
 

YuKKa

Junior Member
Jan 29, 2005
11
0
0
Right,

Re-formatted my machine, updated bios to 1003 from 1001 and installed latest stable nvidia drivers:

3dmark03 - 13k
aquamark - 60k ish

So it was a driver issue that could only be rectified from a clean install - this concerns me. Does this mean that when updating a driver for best performance I may need to clean the hard disk??? Anyone have any experience in this matter to contradict?

Robby
 

vcooper1

Junior Member
Feb 21, 2005
8
0
0
I have to make a correction.
After downloading the new Bios# 1004, I came to find out it is BUGGED!

If was giving me false CPU FAN FAILED Alarms.
I called Asus & spoke to a Tech Rep, & he tells me the 1004 Bios is in Beta form!

OH great! Why did you release it I asked??

The Tech's reply,, It's there for testing it!!!

Then he tells me flash back to 1003. SO I did !

 

mrscintilla

Senior member
Dec 11, 2004
239
0
0
Originally posted by: Insomniak
Originally posted by: FastEddie
Originally posted by: aeternitas
What do people expect from dual 6600GTs. hahahahahhaa
Do you take lessons, or are you just naturally an a$$hole. :)
Probably natural.
probably started off as a small asshole, and over time became an acquired huge asshole.
 

vcooper1

Junior Member
Feb 21, 2005
8
0
0
Excuse me!

I thought I was dealing with mature adults here.
With the comment you just made or quoted, it looks like your the one who takes lessons and passed the test to be a professional A$$hole.
I see how huge an A$$hole you've become!!! Congratulations hahahahahahahaha! :laugh: