Extra External Bays 5 or More

[montyw]

I'm looking for a case to put in removable drive trays(2); a separate DVD burner & CD/RW and Temp. & Fan Controller & front mounted USB 2.0 & IEEE1394 connectors. This means all cases with 4 - 5.25" ext bays are not usable. I'd lile to spend less than $150.I don't want to cut the case apart to put these item in it.
Slightly off subj. What wattage of ps would be min for a multi drive system with SCSI on an Abit IC7-G board? Would PC3500 memory be overkill or just right to o/c a P4 2.6C 0r 2.8C
Thanks
MontyW

 

[lchyi]

Start looking at full tower cases. Those will have plenty of 5.25" drive spaces. Your memory will do fine and so will a 350w to 400w PSU. Most people don't need more than that, even with that kind of ... uh driveage. Anyway welcome to the forums!

 

[Zepper]

Look under Bow Tech on newegg. If your mobo has P4 (4pin, square) power connector for CPU power then any good brand 350-400W PSU would be fine. Just set your SCSI drives for staggered startup. I've got 3 SCSI hard drives and a SCSI burner on a 250W Sparkle (the good one - FSP250-60ATV) no problemo.
.bh.
:moon: