Experiences with JIUHB0312 DUT3C Chips?

[tchybrid]

hey all, i got this chip last week, and slowly i've been working with it. it's currently at 217FSB 10.5x and a 1.9 (actual 1.86-1.88v)

now... when i run prime95 on this sucker, i get errors within 3 minutes of the stress test...

anyone have experiences or actually marks on this CPU?

 

[pillage2001]

What was your temp when you ran Prime95??

 

[tchybrid]

my temps are around 40C to 41C load and my case Temp is 31C

i have a NF7-S v2.0 with the 1.4b1 Bios, so temp are supposidly lower then normal, but i'm also hearing that those temps are correct.

i'm using a SLK900U and a SmartFan2 at 3500RPM to cool the sucker.

 

[pillage2001]

Try running it a 10x200 to see if you are overdoing the RAM. Your temps are about right.

 

[tchybrid]

hmm, i doubt it... my ram is rated at PC3500 at cas 2.0-6-3-3 and i had no problems running it within these specs with my old CPU...

anyone else with experiences with this chip?

 

[pillage2001]

Seems like you have everything right before. I think you've got a dud.

 

[tchybrid]

that would suck... i'm gonna try and down clock it later tonight. i'll take ur advice pill and downclock my ram. i might even have to get my hands on a DLT3C now... :frown:

but anyone else out there with these chips?

 

[pillage2001]

Let me guess. You got your chip from Newegg?? My house mate just got his chip a few days ago. He's trying to overclock it now. I'll let you know how is he doing. Try using a higher multiplier and a lower FSB to see if your board/RAM is the one holding you back. You'll never know.

 

[touchmyichi]

I can do 2 ghz pretty decently, with an increased vcore most of these chips should be able to hit 2.2. Once I get come kingston hyper x, i'll update you all on this.

 

[BG4533]

Is that chip going to last at 1.9V? I have a week 11 DUT3C that doesnt even like 200FSB it seems. I think you are doing pretty well for a DUT3C.

 

[touchmyichi]

I would never go abouve 1.85

 

[Shimmishim]

i wouldn't go above 1.85 actual... i know that with the abit nf7-s in order to get to 1.85, you have to use like 1.93 vcore....

 

[tchybrid]

yup, that shim said, my actual is low when i had BIOs set at 1.9 =P

in the process of tweaking. =)