• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Everest Displaying Incorrect Memory Timings?

D

Dolorous Dave

Senior member
In Everest my memory is showing up as being rated 5-5-5-15 @ 400Mhz under the Motherboard/SPD section. I've changed the timings to 4-4-4-12 in my BIOS and it reads that correctly under the Chipset section of Everest...

The sticker on my GSkill RAM says 4-4-4-12 at 1.9-2.0V, so I'm assuming it's safe to run at those speeds. Does Everest just assume that most RAM is rated to run 5-5-5-15 at 400Mhz?
 
It is probably not interpreting the data it is receiving correctly. As long as the timings are correct in the BIOS you should be OK. I had memtest86 v1.65 report back the wrong FSB and timings before and the results were still valid(the memory passed all tests and the system was stable).
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top