EpoX to the rescue! EP-8RGA+ and EP-8K9A3+

[Tab]

If you already know thats great! I really hope EpoX can straigten out those damn Kt400s! Not to mention the EP-8RGA+ should be avilable sometime this month!

From http://www.mikhailtech.com/

EPoX announces 8K9A2+ and 8K9A3+ motherboards based on VIA's KT400 chipset

EPoX has a very high reputation in Socket A platform. Following the success of its KT333 motherboard, the EP-8K3A+, EPoX is now launching its KT400 based product, EP-8K9A series. From this series of mainboards, EPoX is focusing on 2 models: the EP-8K9A2+ and the EP-8K9A3+.

EP-8K9A2+ features 6 PCI slots, 1 AGP 8X slot, and 3 DDR DIMM for PC2700 Memory DRAM sized 64MB to 3GB. As EPoX always focuses on the high-end market, there are new connection interfaces built in. The new VIA VT8235 south bridge supports 6 USB2.0 connections. The mainboard also has built in Serial ATA with a Silicon Image Sil3112a controller chip to support up to two Serial ATA devices. The peak bandwidth of this technology is 150MB/sec (1.5Gbps serial transfer). Also integrated is a 10/100Mbps fast Ethernet controller in the form of the VIA VT 6103, which supports a LAN function with a RJ-45 connector. It also has a built-in Highpoint HPT372 chipset for Ultra DMA-133 & IDE RAID (0, 1, 0+1) x 2 (Up to 4 Devices)

EP-8K9A3+ is also aimed towards high end users and with a very similar specification with 8K9A2+. Instead of featuring a HPT372 IDE RAID and Serial ATA, EP-8K9A3+ features the HPT374 chip supporting an extra 2 dual channel IDE Ports with Ultra DMA-133 & IDE RAID x 4 (Up to 8 Devices). HP374 also supports JBOD function (Just Bunch One-Disk) to enable multiple hard disks to be seen by the system as one physical drive.

Both of the above 2 models with no exception have strong overclockability. The CPU Vcore and clock can be adjusted within the BIOS. This can also be said of the AGP voltage and memory voltages which are also definable within the BIOS. In order to give re-assurance, EPoX?s Magic health facility which is hard coded into the BIOS is always there to alert the user of any given problem. Users can monitor the system status whilst the system POSTS. A P80P post port of two LED?s (00h ? FFh) can display to the end user 1 of 256 different error codes to assist with any necessary system debugging that may be necessary.

Also, EPoX will have their new 8RDA+ and 8RGA+ boards based on nVIDIA's nForce2 chipset ready to ship very soon, so it's motherboards galore this October.

 

[30wolverine30]

I eat celerons for breakfest!

What does silicon taste like? hehehe