Epox mvp3g2 oc #2

[Amdk6II]

I tried the things that other people said in my other post but it wasn't exactly right
1+3 should be 2.6 vcore but it is 2.9

btw these are jumpers not dipswitches as I said
I'll give you my vcore settings :

-1--2--3--4--5- switch on off
-- on -- on on 1.8
-- on on on on 2.0
on -- -- -- -- 2.1
-- on -- -- -- 2.2
on on -- -- -- 2.3
-- -- on -- -- 2.4
on -- on -- -- 2.5 (wasn't in manual)
? ? ? ? ? 2.6 ?
? ? ? ? ? 2.7 ?
-- -- -- on -- 2.8
on -- -- on -- 2.9
-- on -- on -- 3.0 (accidently found, my cpu didn't blow phew)
-- -- on on -- 3.2

as you can see 1 and 3 is 2.5 but 1 and 4 is 3.0?

 

[A12I]

Hi There,

Did you realize there were so many repliers, but most of them didn't help you so much. So i'm asking you did you found an Epox-MVP3G2 owner who knows exactly about the board?

Well, your question is simple. Set the switch to 2-3 (on) the others (off) then you'll see 2.6V core in your CPU. If not e-mail me!!

**************************************************************************

Now, it's my turn to ask you some questions:

1. how much L3 cache chip onboard on your mobo? 1MB or 512KB?

2. My MVP3G2 have 512KB and i coulnd't be able to ov it over 504 Mhz. Did you think it's make sense because my mobo just a half L3 Cache?

3. My MVP3G2 spec running at 112FSB - 4.5x using PC133 Corsair Micron. Run faster than K6-2 550Mhz with great performance & stable at 1.8V core with 40C (he feel cold in my mobo).