Epox 8K7A question with case fans

[yeedog]

Well i'm putting stuff in my new Lian Li PC 60 case and i can't figure out where I plug in my case fan and fan on the emprex Power Supply. IT's the same funky little connection that is on a CPU fan. Where do i plug in these ohter fans? I found where to plug in the CPU fan, but that is all.

Also do I have to play with the jmpers any? I've left everything at default so far, tho i haven't finished putting it together yet. I got an Athlon 1.4 GHz 266 FSB

 

[Boonesmi]

check the motherboard manual, there should be several other headers on the board for fans (they look just like the one your cpu is plugged into)

 

[heffe734]

check the manual...there's one near the top right of the mobo...and one on the botton middle left. Both 3 pin connector sockets

 

[crzyc]

or you could use a 3->4 pin adapter

 

[ledzepp98]

as mentioned, you either use the extra fan headers on the mobo or get 3-->4 pin adapters. as for other changes, the only change you have to make is set the host clock from 100mhz to 133mhz to take advantage of the 266mhz fsb t-bird. i don't remember off hand which jumper or where, but RTFM (it's in the manual)