Engenius NL-3054CB3

[kevnich2]

I have two (2) Engenius/Senao NL-3054CB3 APs/Bridges. It is similar to this: Keenan Systems I am having the same issue with both of these as AP's. They have an option in AP mode to serve or not serve as a DHCP server. I have a dedicated DHCP server so I don't want the AP as the DHCP server. WIth this disabled, my wireless clients can see and connect to the AP but will not get an IP address. DHCP traffic is not being transferred by the AP. I have another WAP54G by linksys on the same network and it passes DHCP just fine, so I know it's not the DHCP server. If I change the option to have it be the DHCP server, it works fine but then wireless and wired clients get their IP's from the AP and for obvious reasons, I don't want this. I have uploaded the latest firmware multiple times to try and fix this with no success. I don't think it's a hardware issue but rather as a software issue. I'm close to sending them both back in but I'd rather get them working.