Electrocution of a pastor

Page 2 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.

Kadarin

Lifer
Nov 23, 2001
44,296
16
81
One of three possibilities regarding God in this case:

1. God deliberately wanted this pastor to die.
2. God does not care about this pastor.
3. God does not exist.

All three conditions are good reasons to not "worship" God.
 

digiram

Diamond Member
Apr 17, 2004
3,991
172
106
Ok. It was a dumb move. We all agree, right??

Show some empathy. The man had a wife and 2 children. I'm not even a christian, but god rest his soul.

 

whattaguy

Senior member
Jun 3, 2004
941
0
76
My guess is that the phantom power (48V) was turned on at the mixing console...this feeds electicity down the line to give power to condensor microphones which he could have been using.
 

Mark R

Diamond Member
Oct 9, 1999
8,513
16
81
My guess is that the phantom power (48V) was turned on at the mixing console

But this is delivered via a very high resistance - as such, any injury from this would be very unlikely.

The only plausible scenario was that:

1) The amp was faulty (degraded insulation between mains input and electronics)
AND
2) The electrical installation in the church was inadequate (no residual current breaker) or faulty.