I have done alot of research on the tjunction and hardwae monitors accuracy reading it. The problem i am having and maybe some of you may be able to shed more light on this for me.
using the nvidia system monitor my temps under full orthos load are maxing out at about 40c tjunction, it is completly stable at 1.22 after vdroop @ 4.0ghz. When i use any other monitoring tool it says i am close to 68c using the value released for tjunction at IDF last week of 100. If i physically touch the heatsink or heatpipes coming off my zalman cpns 9500 they are completly cool to the touch.
Is the nvidia monitor accurate? or should i trust realtemp or similar monitoring utilities?
Thanks.
Toast
using the nvidia system monitor my temps under full orthos load are maxing out at about 40c tjunction, it is completly stable at 1.22 after vdroop @ 4.0ghz. When i use any other monitoring tool it says i am close to 68c using the value released for tjunction at IDF last week of 100. If i physically touch the heatsink or heatpipes coming off my zalman cpns 9500 they are completly cool to the touch.
Is the nvidia monitor accurate? or should i trust realtemp or similar monitoring utilities?
Thanks.
Toast
Facebook
Twitter