Hey guys, so i've got some limited overclocking experience back in the p3 days however this new box is my first desktop in a couple years due to me being on the road a lot.
anyway i'm running an e7200 processor on an abit fp-in9 mobo I got secondhand. It didn't include a cooler so right now i've got it running on a cheapie glacialtech cooler I bought for like 15 bucks. Because its fairly cheap cooler I don't expect a ton out of it.
stock temps were 50c load and 38c idle.
the CPU has a VID of 1.25v
the core voltage is set to 1.3 in BIOS but reads 1.264 in CPU-z.
fsb 356
multiplier 9
load temp is 65c
should I push this any further? I'm going to run prime 95 overnight to make sure it's stable first.
anyway i'm running an e7200 processor on an abit fp-in9 mobo I got secondhand. It didn't include a cooler so right now i've got it running on a cheapie glacialtech cooler I bought for like 15 bucks. Because its fairly cheap cooler I don't expect a ton out of it.
stock temps were 50c load and 38c idle.
the CPU has a VID of 1.25v
the core voltage is set to 1.3 in BIOS but reads 1.264 in CPU-z.
fsb 356
multiplier 9
load temp is 65c
should I push this any further? I'm going to run prime 95 overnight to make sure it's stable first.
Facebook
Twitter