- Dec 3, 2007
- 983
- 3
- 81
I'm currently having some trouble overclocking my E7200.
It seems like I can't get enough speed out of the voltage I have to run.
It seems like the VID is a lot higher than what I've seen on a lot of forums (1.225V).
Specs:
Intel E7200
EVGA 680i (Latest bios)
4GB OCZ DDR2
Thermalright HR-90 (The extreme-120 doesn't fit in my case =()
Bios Settings:
Clock: 3562MHz (9.5 x 375)
FSB: 375MHz (1500MHz effective)
Divider: Linked 3:4
Memory Frequency 500MHz (1000MHz effective) @ 2.1250V
Memory Timings: 5-5-5-15 @ 2T
CPU Voltage In Bios: 1.3850V
CPU Voltage in windows (idle): 1.368V
CPU Voltage in windows(load): 1.344V
All other voltages set to auto.
Idle temp: 40-44C
Load: 63-65C
Prime 95 + CoreTemp + CPUZ:
http://www.game-deception.org/e7200.jpg
Any lower voltages will make prime95 fail, anything higher tends to not improve my speed at all. (I've yet to pass 1.39 in BIOS, I suppose it wouldn't be that high in windows).
Is there a relation between a high CPU VID and a high voltage tolerance? Should I crank up the voltage and try to increase speed?
Any suggestions?
It seems like I can't get enough speed out of the voltage I have to run.
It seems like the VID is a lot higher than what I've seen on a lot of forums (1.225V).
Specs:
Intel E7200
EVGA 680i (Latest bios)
4GB OCZ DDR2
Thermalright HR-90 (The extreme-120 doesn't fit in my case =()
Bios Settings:
Clock: 3562MHz (9.5 x 375)
FSB: 375MHz (1500MHz effective)
Divider: Linked 3:4
Memory Frequency 500MHz (1000MHz effective) @ 2.1250V
Memory Timings: 5-5-5-15 @ 2T
CPU Voltage In Bios: 1.3850V
CPU Voltage in windows (idle): 1.368V
CPU Voltage in windows(load): 1.344V
All other voltages set to auto.
Idle temp: 40-44C
Load: 63-65C
Prime 95 + CoreTemp + CPUZ:
http://www.game-deception.org/e7200.jpg
Any lower voltages will make prime95 fail, anything higher tends to not improve my speed at all. (I've yet to pass 1.39 in BIOS, I suppose it wouldn't be that high in windows).
Is there a relation between a high CPU VID and a high voltage tolerance? Should I crank up the voltage and try to increase speed?
Any suggestions?