Duron "shutdown" problem

[Laz]

I also posted in the MB forum, but thought I would get more traffic here.

I just put together a Duron system using an A7V. The system works fine using an IDE harddrive, when I install my SCSI drives (no IDE drives) I cannot power the system down. It blanks the screen and does nothing more. Does anyone have a clue as to what might be the problem here, the SCSI controller is an Adaptec 2940UW with 2 LVD drives running in SE mode. The setup works fine on my PIII and is running a new install of win me with the newest via drivers.

 

[k2lme]

Have you looked through "Boot/restart/shutdown problems
" at
http://www.apushardware.com/faqs/kt7faq/allin1.html

 

[Laz]

Yes I checked it out, but that didn't help, I was able to resolve it though. It turns out to be an IRQ issue with the ethernet card (go figure, I was online with it even with the problem). I manually set my IRQ's for all PCI cards and it seems fine now. This has to be the worst MB for IRQ's that I have ever encountered. Thanks for the reply anyway.