Duron+GeforceMX+sblive where does it go wrong????

[morkov]

Hello first time post for me and i'm dutch so please forgive me when i misspel a few words.
Here's my problem:
Just upgraded my computer I bought A MSI KT7pro MoBo and a Duron 700Mhz also a MSI 8817Geforce2MX.
Everything runs well except games (Direct 3d)
I get the Blue screen (terrible sight)
which says vmm(01) + 000099DC error.
Does anyone knows what this mean?
Here is my configuration.
300watt power.(no name)
Aopen 45HX case.
MSI KT7pro.(Via 4-1driver)
MSI 8817 GeForce2MX(detonator2 driver 3 didn't work eighter)
AMD Duron 700Mhz
128MB 100Mhz(no name)
Soundblaster Live Value(Newest drivers for win Me)
Diamond supra 2850 56k6 modem.
Aopen 48speed CDrom
Acer 8x4x32 cdrw
Windows Me
Also I formatted the c:\ and reinstalled windows

 

[rockhard]

Fraid i dont know much about the KT7 Pro but from experience with my KT7 raid you want to put Live card in a PCI slot that doesnt share its IRQ with any onboard controllers like the USB or ATA100 controller if there is one or any other PCI slot if u can.

Ive got my Live in PCI slot 4 which works great

Have a look in your manual, it should give u a IRQ allocation table or similar from which you can tell which slots share and which dont

Hope this helps,

rockhard =)

 

[rmblam]

The vmm error looks to me like a driver issue. I myself would uninstall the current display driver (reboot)install standard vga driver(reboot) then reinstall the 6.27 drivers. Make sure you have directx 7 or 8 installed also; which is likely the culprit because you said neither driver worked.

The Duron is not the issue.

 

[morkov]

Thank you for the reply's.
I will try it later just found out a real strange thing.
I don't know what to make of it.
The system monitor dilivered with my mobo says the temp of my cpu is at 34/36 C but under Sandra 2000 it says 55/57 C is this normal and which monitor tell's the real deal.

 

[Valkore]

If this doesn't work under WinMe, you might want to "downgrade" to Win98 SE and see if it works.