duron 133 fsb is it possable

[BigMoe]

I unlocked my duron 1.2 100x12=1.2 and was wondering if anyone has reached 9x133=1.2? If it is possable can you use the default 133 as not to overclock the agp/pci? What volts are you running?

 

[BD231]

Go for it, I've seen someone on this forum with their Duron at 166mhz fsb with a multiplyer of 6. At 133mhz fsb, AGP/PCI slot's will be in spec mhz range.

 

[pdo]

I have modify the bridge on my Duron 1GHz to 9x and it's running at 1200MHz at default voltage.

 

[rocketbubba]

My Duron 1.0 was a no-go at 133 fsb, but many others have done it. Good luck.

 

[Banana]

My Duron went from native 7x100 up to 7x133=933. I wasn't able to go up to 7.5x133, probably due to cheapo memory and/or quiet HSF solution.

1YP

 

[DAPUNISHER]

Originally posted by: .paldo
I have modify the bridge on my Duron 1GHz to 9x and it's running at 1200MHz at default voltage.

Same overclock but@1.85v.

 

[Richardito]

Using a FSB of 133MHz on a Duron is simple and a no-brainer.

 

[Cat13]

I have my duron 1g running 133 fsb. It is locked at 10, so 1333. This is with stock hsf.

 

[DKNG]

Cat how did you get your 1 gig to 1333 just using the stock hsf? What temps are you getting?

 

[Cat13]

I am getting 26c case and 43c cpu. I replaced my case fans with L1A's and cut out the vents to allow better airflow. Took off the heatpad that came on the hs and applied as3. System has been stable for months. It is my duaghters computer (8) and it survives all she can do to it! :Q

 

[tsnyder]

I had the same luck with a 1Ghz chip... never changed the jumper from 133FSB and the system posted fine at 1.33. CPU temps are in the low 40c range. The system is completely stable, it was an Asus nforce board (220 micro atx)