dual processor and modem problem with win 2K

kah13

Junior Member
Mar 1, 2000
5
0
0
I can't dial internet service or any dial. whenever I dial, it logins and automatically hang up the modem right way. I didn't have that problem if I use one processor. Is there problem with the mother board or the win2K operating system. I replaced diffrent modem but it still the same problem.
I use MB Tyan 1832 with PII 400 dual.
Are there any sugestion? any help will be aprreciated.
 

AndyHui

Administrator Emeritus<br>Elite Member<br>AT FAQ M
Oct 9, 1999
13,141
17
81
Did you install Win2K with both processors in? Win2K uses a different HAL for a dual processor configuration. Look at your device manager.....it should say something about Dual CPU as the Computer Type.
 

IsOs

Diamond Member
Oct 9, 1999
4,475
0
76
While you're checking on the dual cpu listing in the device manager, check if your 2 cpu have the same stepping #.
 

FaultCode

Golden Member
Oct 9, 1999
1,407
0
0
As far as I know the stepping doesn't have to be the same. It wouldn't hurt to have them match though.
 

Ulysses

Platinum Member
Jun 17, 2000
2,136
0
0
Intel recommends that the dual CPU's be of the same speed and stepping.
More importantly, they recommend installing the OS with both processors installed (as pointed out above) - later you can remove one.
:)
 

SUOrangeman

Diamond Member
Oct 12, 1999
8,361
0
0
Just as a side note, if you add the flag '/ONECPU' in the boot.ini file, you can disable the 2nd CPU without having to crack open the case.

-SUO