Dremel Bits

[RKS]

I have a corded Dremel and want to modify/ cut the internal structure of my case. Does Dremel (or any other compatible company) make bits that can cut steel?

 

[Fullmetal Chocobo]

This is what JesDer's Dremel Guide says about bits.
Tas.

 

[Zepper]

The Dremel 9900 series carbide cutters cut steel very well. WalMart carries the one I use most (1/8") for about $8. The cutting wheels work well too for straight lines and shallow curves. Then you'll need some grinding stones to smooth the edges. Be sure to check the Dremel web site (as well as the jesder site) for recommended speeds and hints/tips.

.bh.

 

[runestone]

,,,,and wear some safety glasses when you are doing the cutting.

 

[sparkyclarky]

Originally posted by: Zepper
The Dremel 9900 series carbide cutters cut steel very well. WalMart carries the one I use most (1/8") for about $8. The cutting wheels work well too for straight lines and shallow curves. Then you'll need some grinding stones to smooth the edges. Be sure to check the Dremel web site (as well as the jesder site) for recommended speeds and hints/tips.

.bh.

Yep, I have a Tungsten Carbide bit that almost looks like a drill bit, but without a pointed tip. It is great for tight cutting work. Overall, I probably do most modding with the reinforced cutoff wheels, which are insanely useful for their size.

 

[RKS]

thanks for the links and info.

Are there any issues if I use the flexible extension as opposed to the actual tool?

 

[0roo0roo]

pretty sure i cut steel with mine. normal discs. generic cases are steel right? anyways it was SLOW,..🙂 dremel cuts most anything, just a matter of time and how many discs u wipe out

 

[sparkyclarky]

Originally posted by: RKS
thanks for the links and info.

Are there any issues if I use the flexible extension as opposed to the actual tool?

The flexshaft isn't an issue unless you want to use more than a certain RPM (I think it's 15,000), which you shouldn't need to exceed with standard case modding bits. I will say that the flexshaft tends to bog down/bind a little bit more though, but it is a decent tradeoff for the ease of handling.

For what it's worth, I have the Dremel digital/pro (has an LCD readout for RPM, adjustable in 1k increments from 5k to 35k, along with more overall power) and a flexshaft (the old school, metal handle/non-ergonomic one). It's a tool that is worth buying and keeping for a long time for little projects that come up here and there.

 

[ShadowBlade]

i cut a hole in the back of my old dell case (for practice) with my dremel alone
i would advise doing it in a garage or outside b/c the bit i was cutting with was throwing sparks off
and also get a router attachment if youre gonna be doing long, straight cuts, it helps you stay steady

 

[Zepper]

And keep a small can of Rustoleum Primer handy to treat the exposed steel edges when you're done with the finishing touches on your cuts.

.bh.