DPAD- BWAAAAHAHAHA! Part III

[DanC]

Check your e-mail, DPAD team. 😉

 

[DanC]

A glorious morning this morning. 😉

8.026149 (822.4 Mpts) [v4.31b] {D5FEB92C} <SolenoidsOnly>

m'Buah.

An 8.08 percolating on one of the other machines...

 

[Stormgiant]

DAMM F*!K

Every time the client makes a +7.XXXX muon transfer, it stops at the end...

Gives an erro of not being able to interpretate tantalumrodz=433

ahhhhh....


I'm getting tired of this buggy clients

 

[Overkiller]

yup. after a good result the client stops..no errors nothing...it just exits..

wtf


i might just pull out until v 5.xx

 

[Overkiller]

ok i just got this as a result......

\\



tantalumrodz=444;tantalumrodr=000;s1l=987;s1f=997;d1l=625;s2l=897;s2r=995;s2f=953;d2l=009;s3l=613;s3r=914;s3f=998;d3l=634;s4l=000;s4r=867;s4f=030;d4l=411;s5l=998;s5r=965;s5f=799;d5l=000;s6l=656;s6r=708;s6f=507;d6l=064;s7l=957;s7r=717;s7f=116;d7l=306;s8l=544;s8r=854;s8f=649;d8l=623;s9l=438;s9r=538;s9f=000;d9l=063;s10l=509;s10r=999;s10f=995;d10l=024;s11l=002;s11r=641;s11f=717;d11l=051;s12l=865;s12r=712;s12f=000;d12l=991;s13l=359;s13r=504;s13f=999;d13l=523;s14l=290;s14r=694;s14f=912;d14l=136;s15l=787;s15r=819;s15f=999;d15l=136;s16l=000;s16r=629;s16f=678;d16l=154;s17l=723;s17r=777;s17f=975;d17l=759;s18l=623;s18r=623;s18f=021;d18l=264;s19l=300;s19r=930;s19f=985;d19l=988;s20l=997;s20r=594;s20f=761;d20l=099;s21l=207;s21r=897;s21f=975;d21l=018;s22l=615;s22r=998;s22f=999;d22l=209;s23l=205;s23r=576;s23f=292;d23l=844;s24l=404;s24r=732;s24f=998;d24l=288;s25l=614;s25r=698;s25f=013;d25l=570;s26l=934;s26r=917;s26f=446;d26l=397;s27l=000;s27r=663;s27f=083;d27l=139;s28l=479;s28r=960;s28f=000;d28l=775;s29l=780;s29r=896;s29f=185;
-1.#IND00 (164.1 Mpts) [v4.31b] {A375FC7A} <SolenoidsOnly>

umm.....que?

 

[Stormgiant]

Just found the problem correctely...

When it try's to create some work with a tantalumrodz=433, it gives an error and abort

All the other variables seems to work fine.
One stupid thing is that you never know when the client is going to blow cause the sequence is completely random 🙁

 

[CADsortaGUY]

Originally posted by: Stormgiant
Just found the problem correctely...

When it try's to create some work with a tantalumrodz=433, it gives an error and abort

All the other variables seems to work fine.
One stupid thing is that you never know when the client is going to blow cause the sequence is completely random 🙁

Did you scan your results.dat for tantalumrodz=433? it might just be trying to redo and redo that one bad result.

CkG