Does this board support DDR2 800?

[Adrenaline]

I searched the forums and the internet. I found one place say it supported 800 and nobody else mentioning anything other than this junk:

Native DDR2 800 Support

Which i am kind of confused to what the heck this is.

board

 

[SCSIfreek]

I have search the same topic but found nothing, it seems to me this forum is full of AMD chipset members.....most of the time anyway. I have PC6400 DDR2 running on this board and its very stable....altough the memories are running at a lower speed. 🙁 in other words, this board is limited at 533Mhz (chipset limitation according to the manual).

 

[Adrenaline]

I read a quick note wsomewhere that DDR2 800 is considered overclocking on most boards still at may run at 667 if not at all.

 

[ND40oz]

The gigabyte board I have has a 4x multi for the ram, so I know it can run it 800 without an overclock. I imagine the Asus is the same, but I can't say for sure. Someone here was running his memory in the mid 900s on that board, but he was running a 920 at 4.4+ ghz on water.

 

[RideFree]

Originally posted by: SCSIfreek
I have search the same topic but found nothing, it seems to me this forum is full of AMD chipset members.....most of the time anyway. I have PC6400 DDR2 running on this board and its very stable....altough the memories are running at a lower speed. 🙁 in other words, this board is limited at 533Mhz (chipset limitation according to the manual).

Not true
I have This OCZ 6400 running @ 800.
You'll need to set the FSB to either 133 or 200 in order to see it (I think).
All you need is this from Tom'sHardware to O/C the pi$$ out of it!

 

[smopoim86]

yes it supports 800, the regular p5wd2 premium does also