Does the BH6 rev 1.0 have 1 mhz bus speed increment capabilities?

[Lawrence]

Does the BH6 rev 1.0 have 1 mhz bus speed increment capabilities? I know
that it has the basic bus speeds like 66, 75, 88, 100, 112, 124, 133, etc.
But is it capable of using more specicic settings? I know that the newer
boards have this feature but is there a bios update or trick that will enable
this on the BH6?

 

[Vegito]

No, it's not a feature of the BIOS, it's the clock generator. If the CG can't crank out 1 by 1s.. then no..

 

[Ulysses]

Forcesho is probably right. But go to Abit's website anyway, which is a slow loading one, and find your board. Be sure you've got the correct board & revision. Check the specs and BIOS upgrade descriptions. You might find a lot of good info there.

That's a good but dated board and 1 MHz increments aren't likely.

 

[Tom]

re the Abit BH6 1.0x
Its not much but you can enable turbo when your at 100mhz, which gives you 103mhz. (you didn't mention it so I wasn't sure if you knew.)

 

[rigor]

the bh6 is softmenu II,

it has like 81, 83, 85, 93 , 95, 100, 103 ,105

theres a ton of fixed frequencies on my bh6 with the latest flash eprom.

i just use 100 and be happy

 

[obeseotron]

No, a BH6 rev 1.0x has 66, 75, 83, 100, 103, 112, 124 (bh6 first to have this), and 133. That is IT. The 1.1 had a lot more, and cumine support, but the 1.0x is pretty limited, only a 1/3 PCI divider too.