Does my Duron suck?

[TheNemesis]

Well I built my system today, it's a MSI K7T Pro2 with a Duron 600, and an Alpha 6035. I got it up and running at 3 today, and it's been running ever since. Right now it's running at 6.5 multiplier at default voltage, works like a charm. When I bump it up to 7.0, it won't even post. I bumped up the voltage a little, still no go. Put voltage on full, still no go! So right now it's a 6.5 multiplier and 107 FSB. The current temp is 27 C, and has been that for quite some time. I was also wondering how I could set the voltage higher than 8.0, and how I can change the memory FSB, and CL rating. One more thing, How can I change the FSB in BIOS, I used Fuzzy to do it.

 

[SilverBack]

Did you "unlock" the chip?
You can't change the multiplier unless the chip's L1 bridges are closed.
I have some pictures of what I did with mine here is the link:
Pictures of closed bridges on a TBird, same as Duron don't worry

You don't have to use the fuzzy logic prog.
In your BIOS at the top of the main screen on the right, is the section to change the multiplier AND the FSB, it says 100. Do it in 1MHZ increments (example 101, then 102 )