I need someone woth an ALL-in-WONDER and a continuity tester to tell me which pins are dedicated to the TV-out. its a very simple matter really.. and no risk at all, simply take the proprietary cable for the TV-OUT and touch one lead of the continuity checker(or meter)
to the center conductor of the RCA plug on one end of the cable and touch the other lead of the tester to each pin of DIN (ps2 sort of looking connector that goes into the card) ant tell me which pin lights up the tester ( or meter)
and do the same for the outer tangs of that RCA plug
i have provided a diagram so that you may simply communicate the 2 pin numbers to me.
-----------------------------------------------------
CABLE END:
........ \/
..... 8.7.6
.....5.4....3.......................(note the spacing between 4 and 3)
........2.1
.......^...^
the " V " and the " ^ " represent the notches
(please ignore the dotted lines to the left..etc. this bb software instists on left-justify'ing everything which screws my diagram by removing the spacing.)
----------------------------------------------------
and....though the top notch is different the same diagram may be used for the VIDEO-IN
and if not too much trouble.. could you provide me those 2 pin numbers also..
before you ask... ATI has refused to give me this iinformation
thanks in advance for your help.
to the center conductor of the RCA plug on one end of the cable and touch the other lead of the tester to each pin of DIN (ps2 sort of looking connector that goes into the card) ant tell me which pin lights up the tester ( or meter)
and do the same for the outer tangs of that RCA plug
i have provided a diagram so that you may simply communicate the 2 pin numbers to me.
-----------------------------------------------------
CABLE END:
........ \/
..... 8.7.6
.....5.4....3.......................(note the spacing between 4 and 3)
........2.1
.......^...^
the " V " and the " ^ " represent the notches
(please ignore the dotted lines to the left..etc. this bb software instists on left-justify'ing everything which screws my diagram by removing the spacing.)
----------------------------------------------------
and....though the top notch is different the same diagram may be used for the VIDEO-IN
and if not too much trouble.. could you provide me those 2 pin numbers also..
before you ask... ATI has refused to give me this iinformation
thanks in advance for your help.
Facebook
Twitter