- Jun 5, 2004
- 10
- 0
- 0
Anyone have clues as to why adding a Audigy 2ZS PCI to, an otherwise normal ASUS P5wd2 mobo would result in a DMA-1 Fatal Error, System Halt message from BIOS?
Prior to adding the Audigy card I disabled High Def Audio in the AMI BIOS and removed the RealTek software and drivers with XP-Add Remove Software>>Shutdown>>Power-off PSU>>added card>>Power-on PSU>>Hit Start>>One short beep from POST =good>>DMA-1 Fatal Error>>All Stop.
Power-off PSU>>Remove Audigy card>>Power-on PSU>>Hit Start>>Normal Boot to XP.
Note: Same result from a SB Live PCI card although both work without problems in old 4100 Dell
Thanks, Don
Specs
ASUS P5WD2
Intel P4 650 @3.4
Corsair DDR2 PC800
WD SATA2 250 w/16MB
ATI Radeon X800XL PCI-e w/256 GDDR3
Thermalright XP-90c w/ 92mm PWM
Coolermaster Patorian
OCZ ModStream 520 w
(2) Liteon CD/DVD x16 Burners
Onboard RealTek Audio (for now)
Audigy 2ZS PCI
Windows XP Pro w/SP2 + all Updates
Prior to adding the Audigy card I disabled High Def Audio in the AMI BIOS and removed the RealTek software and drivers with XP-Add Remove Software>>Shutdown>>Power-off PSU>>added card>>Power-on PSU>>Hit Start>>One short beep from POST =good>>DMA-1 Fatal Error>>All Stop.
Power-off PSU>>Remove Audigy card>>Power-on PSU>>Hit Start>>Normal Boot to XP.
Note: Same result from a SB Live PCI card although both work without problems in old 4100 Dell
Thanks, Don
Specs
ASUS P5WD2
Intel P4 650 @3.4
Corsair DDR2 PC800
WD SATA2 250 w/16MB
ATI Radeon X800XL PCI-e w/256 GDDR3
Thermalright XP-90c w/ 92mm PWM
Coolermaster Patorian
OCZ ModStream 520 w
(2) Liteon CD/DVD x16 Burners
Onboard RealTek Audio (for now)
Audigy 2ZS PCI
Windows XP Pro w/SP2 + all Updates