- Jul 22, 2008
- 1,473
- 0
- 76
I had no plans to OC my E8400, because I absolutely do not need extra speed for anything that I do. The 3.0GHz covers all my needs and then some. But when I first booted up for some reason my multiplier was set at 8.5 instead of 9, so when I went to change it, I went ahead and tried going for 9x400 just for fun (planned on going into bios immediately after rebooting to check cpu temp and shut down if anything looked wrong because I'm inexperienced).
To my surprise, my processor ran steady at 3.6 with no other tweaking whatsoever. I booted into windows and ran prime95 for an hour and a half or so just to make sure. I checked temps and it's barely hotter than when I ran it at 3.0.
I'm intrigued. I'll read the OC guide, fool around some more, and update =D
To my surprise, my processor ran steady at 3.6 with no other tweaking whatsoever. I booted into windows and ran prime95 for an hour and a half or so just to make sure. I checked temps and it's barely hotter than when I ran it at 3.0.
I'm intrigued. I'll read the OC guide, fool around some more, and update =D