DFI K6XV3+/66 - Do I need to install VIA 4-in-1 drivers?

[AamirQ]

Hello,

I recently obtained a DFI K6XV3+/66 (Rev. BB+) motherboard. It's a Super 7 board which uses the VIA MVP3 chipset. This is only the second computer I'll be putting together, and it's the first with a non-Intel chipset.

I've read about VIA 4-in-1 drivers in other postings... I plan on using Windows 98 Second Edition, so which drivers should I plan on installing? This is the current list of drivers on VIA's website:

- IDE Busmaster (I heard this one should NOT be installed, true/false?)
- AGP Driver
- IRQ Routing Driver
- INF Driver
- PCI Bridge for MVP3 chipset
- USB filter driver

Another question... are these drivers supposed to be installed while running Windows? Or do I have to use a start-up disk and install them in DOS mode?

Thanks in advance,

Aamir

 

[BuckMaster]

AamirQ I just D/L the newest set of 4-1 drivers here and installed them without any probelms: VIA 4-1 Driver
I installed everything that was default. Didnt have any problems at all. Also after you D/L any of the 4-1 drivers its a exe file so you can install it through Windows.