panhead49

Golden Member
Jan 27, 2001
1,880
0
0
i've got the same setup and 1.5 is my current stable speed..........150x10..........i have gone to 1.52....around there but would always crash within time....with the 1.4 tbird i have seen 1.5 about the average top end ...some may get higher ...

play with your voltages ...like was said.....go for it
 

MilkPowderR

Banned
Mar 30, 2001
529
0
0
MicroAMD2k1,
Like what the others said here, Vcore should solve that problem.
On the Iwill KK266 mobos, I believe they are maxed out@ 1.85V manual. Try 1.85V and see if it works. If not, you might need more voltage. In that case, you'll have to Volt mod your chip. I haven't done it on the Athlon T-bird yet.
 

Jwyatt

Golden Member
Mar 22, 2000
1,961
0
76
Be happ with 1500!! Your not going to see a bit more performance from going up 2 or 5 fsb! Only time you will see it is when doing synthetic benchmarks! What good is that? Its not going to make your computer boot faster or crunch seti, but 2 minutes faster, so WHY?

I ask this whilst im trying to get my p4 1.6a from 2.5g to 2.6 stable :)