• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

DDR3 Voltage too high on auto-setting?

S

snowcake

Junior Member
Hello,

If you take a look at the photo below than you can see the DRAM Voltage is at auto setting 1.585V. The Asrock program reports the same voltage for the ram. However the ram modules are specified to work at 1.5V.
Is this a problem or is it oke? I am quite worried to see this. it is a new pc.

qMfPy.jpg
 
If your sure the RAM is rated at 1.5v then yeah thats a bit high but it shouldnt hurt anything.

If I were you Id set the ram voltage manually and set 1.51v or 1.52v
 
snowcake said:
Hello,

If you take a look at the photo below than you can see the DRAM Voltage is at auto setting 1.585V. The Asrock program reports the same voltage for the ram. However the ram modules are specified to work at 1.5V.
Is this a problem or is it oke? I am quite worried to see this. it is a new pc.

qMfPy.jpg
Click to expand...

Would this be Patriot RAM by any chance? They made a blunder earlier where they didn't rename a product but went from 1.65 to 1.6 or 1.5v. So even though their RAM was listed as 1.5v on newegg it was actually 1.6v listed on other sites, and the box said 1.65v!
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top