DDR "0" - Answered, thanks

[dummy2001]

This is admittedly a minor issue but I don't want it to come back and haunt me when it is too late to RMA the hardware. I just built a system (my first) with an ECS K7S5A mainboard and 128mb Kingston 2100 DDR ram. On a startup screen that usually flits by I can see that it reads the correct amount but shows DDR dimms as 0 and Sdram as blank. Putting dimm in other socket shows DDR as 1 and sdram as blank. Is it possible for a defective socket to cause a DDR dimm to only perform at Sdram speed, or is it a deal where if it works at all it will work at full speed? Is this something I need to worry about?

The new machine (including parts from old machine):
K7S5A motherboard
Tbird 950mhz
Enhance 300w PSU AMD approved up to 1.2ghz
128mb Kingston DDR 2100 ram
Seagate 8gb HD
Plextor 8/4/32 cdr-w
samsung cd
Diamond Stealth savage4 32mb pci video card

 

[chemwiz]

shows DDR dimms as 0 That means it's in bank 0, that's where it should be.

 

[dummy2001]

That's why my name is dummy. Thanks.😕😛😉😱😕