Dbox case with Asus A7V333-X Motherboard

[SilkyJohnson]

I have an AHANIX dbox case that I'm puting an Asus A7V333-X motherboard in. I'm having trouble with the System Panel Connectors. I found the ATX Power and Reset Switch connections but there are 2 sets of 4 wires that I don't know where to connector and what they do. They are labeled (1)Ground, (1)+5V, (1)+D, (1)-D and the other set is (2)Ground, (2)+5V, (2)+D, (2) -D The system won't power up with just the ATX Power and Reset Switches connected so I'm stuck. The manual says the remaining pins are for: Keyboard lock -2 pins, and the system management interupt lead -2 pins. There are also 3 other wires labeled CH1, CH2, and CH3. Could somebody please help me?

I'm pretty new to building pcs. I built another computer 6 months ago with an A7V8X motherboard and a Noblesse case with no problems.

 

[boyRacer]

Those two sets of wires sound like the USB connectors for the front of your case... have you tried flipping the way the ATX power switch goes in? It maybe plugged in the wrong way. Those 3 channel wires is for the digital thermometer readout at the front. These right? Good luck!

 

[digitalix]

I do believe there's a power connector from the front panel that you plug into the motherboard on that case. As for your 8 pins, those are definitely for USB. The 3 wires are just thermal probes with the tape package thermistors.