cusl2 settings for 133mhz sdram and 100mhz pIII

[cparker]

I am setting up a cusl2 and I have 3 sticks of mushkin rev2 133mhz sdram. I also have a PIII 750 at 100mhz. I am a bit confused about how to best set up the bios. I suppose I could set it for 133:133:33 and see if it works, but I wanted to start with 100:100:33 and maybe later work my way up. Will the auto detect feature figure out that I have a 100mhz cpu and then set the cpu and ram ratio to 100:100 automatically or do I have to put this in myself (or maybe even set the dip switches).

Or should I just use the 100MHZ SDRAM that I have and save the 133MHZ dimms for when I get a 133mhz processor.

Thanks,

CPARKER

 

[AndyHui]

The CUSL2 will automatically detect that you have a 100MHz FSB processor, and set both the FSB and RAM to 100MHz as default.

The i815E chipset does not support setting 100MHz FSB and 133MHz RAM.

 

[cparker]

Thank you! I'll set it up then. Appreciate the help.

cparker