CUSL2 Memory Fix after 140fsb !!!

[Sharpi]

Cicada has just found a major fix using WPCRedit for the memory
after 140fsb, on http://www.overclockers.com.au/ on the CusL2
forum there for details, after trying it myself it I found it works
like a charm, congratulations Cicada on what I believe is a major
step forward, here is what I got in improvements after using Cicadas steps in SiSandras memory scores.
Before change:
140fsb-414/487 2-2-2 7/9
141fsb-389/447 "
After your change:
141fsb=417/491 2-2-2 7/9
143fsb=423/497 "
145fsb=429/505
146fsb=432/509 "
147fsb=435/512
148fsb=Blue screen 2-2-2 7/9
148fsb=363/411 3-3-3 7/9
Sharpi
Specs

Cpu : PIII-700E@980@2-2-2
M/board : Asus Cusl2 Rev1.02 (Bios1003-004)
Memory : 2x128 Mushkin Rev2 Cas2 pc133 Ram
Video/C : Matrox G400max
Sound/C : SB Live Value (retail)
Hard/D : IBM 75GPX (30gig)
Cd-Rom : Asus 50x max
Floppy : Sony
Op/Sys : WinMe
Cooling : Alpha Pal-35 with Sanyo-Denki fan
Case : MaCase K10 300w with 2xAdda 80mm silent fans
Sandra : Mem: Alu=414
scores Fpu=487
Cpu : Mips=2714
Flops=1318

 

[Zagor]

Where exactly did you get Cicada's info. I couldn't find it. Can you be kind enough and post the registry tweeks you are referring to. Thanks.



Never mind...I found them...

 

NICE.
Is that only pertaining to the CUSL2?
Or would I encouter the same issue with a MSI?
I have pretty much the same setup, except im not clocking this CPU until it gets replaced with one that can do higher speeds at a lower voltage.

 

[Detoyminador_]

can you post the link please, i can't find it.

 

[bigd480]

did this improve stability at higher speeds? or just better scores at stable speeds?