Curing period for AS5?

[Armageddon415]

How long is the curing period for AS5 and what kind of temp drops should I expect after its done breaking in?

I just got a mobile barton and its running a bit hot for my taste. I had it at 2500 (12.5x200) at 1.78 volts and it was running 58C at full load and around 53C at idle. I'm using a SK7 with a 2500rpm fan on a NF7-S v2

 

[MichaelZ]

the site says 200 hours. you should notice 3 degrees drop full load at least after 1 night. that's the difference i got after the first 24 hours passed.

 

[Rafael]

I think your temp is a little bit high, but it is right.
I got almost the same setup as you have, except for the processor, I got a XP 1700+ @ 2.2 Ghz, vcore 1,60.
But my temps during the Summer with a room temp of 28ºC I get about 48ºC running 24/7, full load, running UD here.
Maybe changing the fan will drop a little bit the temp.

Raf

 

[lenjack]

If by curing, you mean how long will it take to set or harden...it won't. It is not an adhesive...it doesn't set.

 

[DaNorthface]

btw, you should let it cool and let it have a rest period inbetween heating it up

 

[someone16]

Those temps should be fine because of the low fan speed my aeroflow @1.8V gets 54C load