Wanescotting
Diamond Member
Okay, got my 1090t booting into windows @ 4ghz 1.34v passes of intel burn test/ 20 minutes of prime 95 (mild stabilty testing, will go all out when I find brick wall). Under load cpu volatge jumps to 1.42v, and does not move. I know llc is doing its job, but is a spike of .08v too much? I have "cpu llc" set to auto in bios. Should I try medium instead?
Also, nb is @ 2800mhz @ 1.15v, "nb llc" set to auto.
I wouldn that since cpu vcore is not going above 1.5v I should be okay. I truned llc off on the crosshair formula 4, is sucked, so I really don't have a good understanding of it.
any help is appreciated, btw load temps are 54c at load, 85f in my house! I would say wc setup is doing a great job 🙂
Also, nb is @ 2800mhz @ 1.15v, "nb llc" set to auto.
I wouldn that since cpu vcore is not going above 1.5v I should be okay. I truned llc off on the crosshair formula 4, is sucked, so I really don't have a good understanding of it.
any help is appreciated, btw load temps are 54c at load, 85f in my house! I would say wc setup is doing a great job 🙂
