The CPU is an AthlonXP 1600+ unlocked with Tom's Hardware's method. (by connecting the L1 bridges using conductive liquid)
I was able to lower the multiplier below 10.5 and above 6 I think. But no more than 10.5 or less than 6. Anything higher than 10.5 or less than 6 the machine would not boot. The mobo I use is an Epox 8KHA+ with BIOS version dated 1/16/2002
Any suggestions?
Thanks
I was able to lower the multiplier below 10.5 and above 6 I think. But no more than 10.5 or less than 6. Anything higher than 10.5 or less than 6 the machine would not boot. The mobo I use is an Epox 8KHA+ with BIOS version dated 1/16/2002
Any suggestions?
Thanks
Facebook
Twitter