would an unlocked 2600+ t-bred B CPU (default fsb @ 333 aka 166) run ok (but underclocked?) on a motherboard which only supported 266fsb aka 133?
by default, with jumpers set to 266fsb, would it run at 12.5x133= 1666mhz?? (instead of the normal 12.5x166=2083). or would it not run atall?
would it detect the voltage required correctly (ie 1.65v) or would it just go with the 'board/chipset default' (K266) ?
by default, with jumpers set to 266fsb, would it run at 12.5x133= 1666mhz?? (instead of the normal 12.5x166=2083). or would it not run atall?
would it detect the voltage required correctly (ie 1.65v) or would it just go with the 'board/chipset default' (K266) ?