• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

cpu causing system to shut down after 3-4 sec...

T

thujone

Golden Member
ok... been having a ton of problems recently. realized it was a faulty psu and thought it might have fried the 2 cpu's i'd tried in the system. took both to a local shop and tested them in a system there... retail 2400+ was dead... the 2600+ oem i had been using posted fine.

however... now that i have it home... in my system when i power it on it doesn't post/boot/beep... the system sits there for 4 or 5 sec then just shuts off. this is using a new PSU of course.

just wondering if anyone had any ideas of what i could do to fix this? the old faulty psu had been used on this system... so i suppose it IS possible it could have killed something else in the system... BUT... i'm hoping that isn't the case...

here's my current set up...

Antec Solution 430w retail
2600+ CPU w/SLK800A + vantec thermal controlled 80mm fan
1x 512MB Twinmos Twister pc3700
DFI Lanparty Ultra B
HIS X800 Pro
Mitsumi CDRW
2x WD 40gb drives
1x WD 10gb drive
2x UV cc's
2x 80mm exhaust
1x80mm intake

any ideas would be appreciated
 
also... just for reference it did this with another motherboard, ram, video card... so i'm almost sure it has to be a cpu problem
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top