Replaced a 800 T-Bird w/a 900 T-Bird. On intial boot(from the get go) I have to use the reset button to get into Win 98SE or Win 2000 (initially no beep or video-just black screen). Once in everything seems fine. Shuts down okay but if I have to restart the machine ie: after installing a new program, black screen, no beep. I must use the reset and all boots up. Only difference was the new processor install.No overclocking. ANY IDEAS?
Asus A7V mb
ATI Rage Fury Pro 32mb AGP
Taisol Heatsnk fan (1.2GB)
Mag 800V Monitor
512 mb Cas2 Crucial sdram 1x256+2x128
USR 56k PCI
Netgear FA310tx-nic
SoundBlaster Live Value
Antec SX830 case w/4x80mm case fansplus the normal cpu + ps fans
Plextor 12x10x32 CDRW
Win98SE/Win200Pro dual boot
Maxtor DiamondMax Plus 40 7200rpm 20GB 66ata
IBM 75GXP 100ata 7200rpm 45GB
Drives are using ata66
Dlink firewire card
Asus A7V mb
ATI Rage Fury Pro 32mb AGP
Taisol Heatsnk fan (1.2GB)
Mag 800V Monitor
512 mb Cas2 Crucial sdram 1x256+2x128
USR 56k PCI
Netgear FA310tx-nic
SoundBlaster Live Value
Antec SX830 case w/4x80mm case fansplus the normal cpu + ps fans
Plextor 12x10x32 CDRW
Win98SE/Win200Pro dual boot
Maxtor DiamondMax Plus 40 7200rpm 20GB 66ata
IBM 75GXP 100ata 7200rpm 45GB
Drives are using ata66
Dlink firewire card
Facebook
Twitter