could i hook up 3 fans to one controller?

[slightlyhuman]

like this?

http://www.newegg.com/Product/Produc...-003-_-Product

 

[aigomorla]

depends on fan.

3 GT's no problem... the GT draws so little current you could probably do 5.

3 San Aces / panflo? ummm... your asking for it pop... and i mean big time.

 

[slightlyhuman]

what exactly is a GT fan? i've got 2 80mm regular no name fans and 120mm that came with my cooler master case. might end up getting 2 of the controllers unless you think i'll be alright with 1?

 

[ElFenix]

what exactly is a GT fan? i've got 2 80mm regular no name fans and 120mm that came with my cooler master case. might end up getting 2 of the controllers unless you think i'll be alright with 1?

scythe gentle typhoon

 

[aigomorla]

what exactly is a GT fan? i've got 2 80mm regular no name fans and 120mm that came with my cooler master case. might end up getting 2 of the controllers unless you think i'll be alright with 1?

what is the amperage on the fan.

it should say 12V. with .25amps - .58 amps. on the heavy class fans.

You'll be fine with up to 1 amp i am guessing on that controller.

Example:

see the numbers under san ace... it says the voltage + amperage.

 

[slightlyhuman]

.12 .15 and .16

 

[aigomorla]

.12 .15 and .16

you'll be fine on 1 controller.

as i said as long as your numbers dont total to 1.

 

[filter1_1]

like this?

http://www.newegg.com/Product/Produc...-003-_-Product

I also had the same problem, I came across this sweet fan control it holds up to 6 fans, provides several speed settings, a cool neon blue screen...
easy plug n play

check it out: http://www.pimfg.com/Product-Detail/dt-6800

 

[kalrith]

I tried that, and the fans would stop if I ran them lower than about 70% of max speed. Whereas I could run them at about 30% of max speed with only 1 fan per controller.

 

[slightlyhuman]

got the adapter i linked above. my question is how can i hook up three fans to it?

little background: i've got the 3 fans hooked up to an AC adapter from a phone charger(i need them to plug into a socket). how can i go about hooking up the power source and the fans to this controller?