Corsair 600T cooling question.

[xInhibition]

I was looking at the Corsair 600T White and found out that the cooling wasn't that great. Bit-tech.net said that it may have been because the 200mm fan on top is more toward the front than normal. I was thinking about replacing the top 200mm fan with 2 120mm fans, would this improve airflow and cooling. I will be using the Corsair H50 for my CPU the CPU is a 2600K the GPU is a GTX 580.

 

[stahlhart]

I clearly don't know jack about the Corsair 600T. Sorry!

 

[Rifter]

If you remove that mesh cover on the top you will see it is already setup to hold a 240mm rad which means you can bolt 2 120mm fans to it no problems. Holes are already there.

 

[ViviTheMage]

If you remove that mesh cover on the top you will see it is already setup to hold a 240mm rad which means you can bolt 2 120mm fans to it no problems. Holes are already there.

This.

I did this to my rig :http://vivithemage.com/2011/04/water-cooling-a-corsair-600t-case-i5-2500k-2x6950/

I have a bunch of pictures of it as well...the rad up top is 34mm, so I have to imagine a normal 25mm~ 120mmx2 fans will fit.

 

[Majic 7]

I'm using a H70 in that case. Specs in sig. 32C idle cpu, 55 to 60 loaded. GPU idles around 36 to 38, fan at 50%. Games at about 60c at 80% fan speed. AC at about 76F. The fans are crap though, replaced the top fan with a 120 because it wouldn't start unless I flicked it. Only replacement fans I've found are Xigmatek. Don't know whether to try them or not. I could only use one 120 fan on top because the H70 radiator and fans are in the way of the rear fan. I wouldn't bet on a H50 allowing a second fan to be placed on top either. Looks pretty tight, maybe with cooling lines on the bottom. Mine are on top.
Just checked with a H50 rad, it will fit with two fans on top but the cooling lines probably need to go on the bottom. Pretty sad I have both, but when I went to MicroCenter to pick up the case I got the fever.

 

[xInhibition]

I am not getting this case I decided to go with the HAF 932. Thanks all for your reply's.