• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Cooler master hyper 212 underrated?

Chaosblade02

Chaosblade02

Senior member
I feel like this CPU cooler is underrated. My I5 2500k CPU idles at 23-25C, when the case temp is in the 32-35C range. I never saw it go over 42C under load. This was with no overclock.

I'm gonna wait and overclock after I do a lot more research into it, but it seems like I have plenty of room to go up and still be in the safe zone.

biosb.png
 
Last edited:
212 is not underrated. It is very good for its price.


Btw, what is your room temperature when the CPU is at "23C"?
 
the 212+ is very under-priced, not underrated IMO. it is a very good cooler which can beat some coolers that are double the price
 
Since it's one of the most popular CPU cooling solutions around here, I'm not sure why the OP would think it's underrated...
 
mv2devnull said:
212 is not underrated. It is very good for its price.


Btw, what is your room temperature when the CPU is at "23C"?
Click to expand...

About 75 F, which equals almost exactly 23C. So my CPU is cold to the touch, room temperature when its not working hard.
 
Last edited:
Just curious, but what's the best method of applying thermal compound to this heatsink?

I've read so many different ways; I think I'm going to fill in the gaps between the copper pipes, then a couple of strips along the aluminium.

But that sounds like a lot of paste to use..
 
It used to be amazing, but now it's "just" good. The Corsair A50 is a bit cheaper and provides better heat dissipation and noise.
 
My 212+ keeps my cpu nice and cool, but the fan that comes with it is much louder than I like, and will be replaced. FWIW, I tried several of the suggest methods of applying AS5, but ended up using a bb-sized dot in the middle (after filling the gaps). So far, so good.
 
Last edited:
Binky said:
A CPU cannot idle at room temp on air. This should be obvious.
Click to expand...

This.

Hey my CPU is 10 degrees lower than the ambient air in the case! This cooler is so underrated.

No - your temp reporting software for either the CPU or the case temp is off.
 
Chaosblade02 said:
I feel like this CPU cooler is underrated. My I5 2500k CPU idles at 23-25C, when the case temp is in the 32-35C range. I never saw it go over 42C under load. This was with no overclock.
Click to expand...

That can not be your idle temperature. No heat sink can get temps lower than the air that surrounds it. Not even water cooling can do that. The only way to get below ambient temps is a phase-change setup, a TEC, LN2, and maybe dry ice.

The system temps referred to in the op probably refer to the NB or somewhere else on the motherboard and not the temperature of the air in the case.
 
Last edited:
haha underrated? It is the single most overrated cooler around mostly becuase of the price. If someone wants the outright cheapest cooler that produces the best temps it's probably the one to go to, but if you want something with a decent build quality and low noise look elsewhere...
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top